SAE AS15720D
FITTING, LUBRICATION, HYDRAULIC, THROAT OR SURFACE CHECK, .250-28 TAPER THREADS, CORROSION-RESISTANT STEEL, TYPE VII
standard by SAE International, 06/02/2023
Cheap EEMUA,FCI,HI,IADC,IAPMO,IEC,IEEE,ISPE,IMO,ISA
Standards list
FITTING, LUBRICATION, HYDRAULIC, THROAT OR SURFACE CHECK, .250-28 TAPER THREADS, CORROSION-RESISTANT STEEL, TYPE VII
standard by SAE International, 06/02/2023
CRIMP TOOLS, TYPE 1, HAND OR POWER ACTUATED, WIRE TERMINATION, HYDRAULIC TOOL FOR WIRE BARREL SIZES 0000 THROUGH 8
standard by SAE International, 05/22/2023
Production, Handling, and Dispensing of SAE J1703 Motor Vehicle Brake Fluids and SAE J1704 Borate Ester-Based Brake Fluids
standard by SAE International, 06/27/2023
Polymeric Bearings for Linear Actuators
standard by SAE International, 06/20/2023
Titanium Sheet, Strip, and Plate Commercially Pure Annealed 40.0 ksi (276 MPa) Yield Strength
standard by SAE International, 03/20/2023
Test Method for Measuring Power Consumption of Air Conditioning and Brake Compressors for Trucks and Buses (Stabilized: May 2023)
standard by SAE International, 05/01/2023
Brake Force Distribution Performance Guide – Truck and Bus
standard by SAE International, 07/26/2022
Guns, Spray, Oil and Solvent (Stabilized: May 2023)
standard by SAE International, 05/22/2023
FITTING ASSEMBLY, ELBOW 45°, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE
standard by SAE International, 05/30/2023
Titanium Tubing, Welded 40 ksi (276 MPa) Yield Strength
standard by SAE International, 08/01/2023